概述Brief introduction

高速分散机适用于涂料、染料、颜料、油墨、造纸、胶黏剂等化工行业对液体及液固相物料进行搅拌、分散和溶解。具有搅拌、分散时空气吸溜极少，混合和均匀效果俱佳，用中高速搅拌、分散可使物料迅速溶解，颗粒变小的特点。

High-speed disperser is suitable for mixing, dispersing and dissolving liquid and solid materials in chemical industries such as coatings, dyes, pigments, inks, papermaking and adhesives. It has the characteristics of little air suction and slippage in mixing and dispersing time, good mixing and uniformity effect, rapid dissolution of materials and small particles by mixing and dispersing at medium and high speed.

性能Performance

一、机架型号及适配主功率：

1、FG250机架适配功率：5.5kw；7.5kw；9/11kw；11kw；

2、FG350机架适配功率：9/11kw；11kw；15kw；18.5kw；18.5/22kw；22kw；30kw；

3、其它机架适配功率：1.5kw；2.2kw；3.7kw；4kw；30kw；32kw/42kw；45kw；55kw；75kw；90kw；

二、速度要求：

1、速度类别：单速；双速；无极变速；有极变速（多速）

2、变速方式：电磁变速；变频变速；减速器变速；变速带变速。

3、速度范围：400r/min以下低速；400-1200r/min高速；1200r/min以上特高速。

三、分散盘型式：

平盘锯齿式；三叉浆式；蝶式；其它形式。

四、安装形式：

FG型（落地式）；FX型（平台式）。

五、选配料筒直径与分散轮直径比：3-4:1。

六、电机电器：隔爆型：非隔爆型即普通型；特殊要求型。

1. Frame type and main power:

1.Applicable power for frame fg250: 5.5 kw; 7.5 kw; 9/11 kw; 11 kw;

2. Applicable power for frame fg350: 9/11 kw; 11 kw; 15 kw; 18.5 kw; 18.5/22 kw; 22 kw; 30 kw;

3. Adaptation power of other frame: 1.5 kw; 2.2 kw; 3.7 kw; 4 kw; 30 kw; 32 kw/42 kw; 45 kw; 55 kw; 75 kw; 90 kw;

2. Speed requirements:

1. Speed type: Single; double; Stepless ; step (Multi)

2. SIngles Speed: magnetic; frequency cobversion; reducer ; shift belt.

3. Speed range: low speed below 400r/min; high speed below 400 - 1200r/min; opecial speed over 1200r/min.

3. Dispersion disc type:

Flat disc sawtooth; trident; butterfly; Other type.

4. Installation type:

Floor stand, platform  (platform frame).

5. Tank diameter and dispersing wheel: 3-4:1.

6. Motor and electric : expiosion proof, common; special requirement.

技术参数Technical Parameters